Deprecated: Methods with the same name as their class will not be constructors in a future version of PHP; plgSystemNiceUserInfoLite has a deprecated constructor in /home/ddsystem/public_html/perfectpower.com/plugins/system/niceuserinfolite/niceuserinfolite.php on line 28
SMT-FTX Technical Manual - Using The External Display Option

SMT-FTX TECHNICAL MANUAL

Perfect Power Online Manuals.

 

Support for your SMT-FTX Unit.

USING THE EXTERNAL DISPLAY OPTION

The display option is a convenient way to display engine measurement in the cockpit without a laptop. For this reason the unit has 2 pin connector, which allows the connection of 8 displays. The engine measurement each unit displays can be selected by the PC.

 

This is the process:

Select up to 8 variables from the display list which you like to see on the external display.

SMT-FTX Fuel Tuner - Remote Display Manager

With this step you assign a reference number to each variable.

Connect one (or any amount up to 8) displays to the connector as follows:

 

SMT-FTX Fuel Tuner - External Display Wiring

 


Short the ‘selection wire’ to +12V until the unit displays:


The displayed number from 1 to 8 is the reference number of the assigned variable in step #1.

 

After a few seconds the variable is displayed.
The selection process is only required once. The displays retain the reference numbers.


POPULAR DISPLAY VARIABLES

 

  • AMP
  • TPS
  • RPM
  • AFR
  • Injector Utilization
  • DISPLAY OPTIONS
  • Average
  • Peak and hold
  • Mirror

SMT-FTX Fuel Tuner - Remote Display Manager